Quick Instructions




STEP 1


Place the battery in the bottom compartment and rotate it until it locks in place.Charge for 3.5 hours before each
use. Full charge when the adapter LED turns green

STEP 2


Fill water tank up to the indicator,and securely screw the device on tank.


STEP 3


Place the shisha tobacco in the glassbowl,insert it into the ceramic container,Attach the heater, and gently rotate ituntil it locks in place.

STEP 4


Press the power button for 3 seconds toturn on the device.Smoking session starts after 300-second waiting(Auto
Mode). If you want,Press both left and right buttons to switch to manual mode for more flexible power control.


STEP 5

Hold right button 3s to switch lighting modes.


STEP 6


Enjoy. After 15 minutes, you should lower the power to H1-H2 extend your session.

  Warning
Do not wash the device with water. Use wet wipes for the exterior and a brush for intenal pipes.